This error occurs when trying to install or boot (typically the CD image or Netinstall mode) on a physical server or PC, and the installer cannot detect any optical drive. However, because MikroTik is usually installed on flash drives, hard disks, or virtual machines , this error often indicates a deeper boot or storage controller issue.

If none of the above works, consider running on a hypervisor – it eliminates all hardware compatibility issues.

legacy_ide=1 all_generic_ide=1 Or to skip CD detection entirely (not always possible):

| Setting | Recommended value | |---------|------------------| | | IDE or Compatible (not AHCI, not RAID) | | Boot Mode | Legacy or Legacy+UEFI (avoid pure UEFI) | | CSM | Enabled | | Secure Boot | Disabled | | Fast Boot | Disabled | | USB Legacy Support | Enabled |

RouterOS’s kernel (especially versions <7.x) expects legacy IDE CD-ROMs. Switching SATA to IDE mode often resolves the error. 3.3. Try Netinstall (Most Reliable Method) Netinstall bypasses the CD-ROM check entirely by booting a small kernel over the network.

Here's what people are reading

Fatal Error No Cd Rom Found Mikrotik May 2026

This error occurs when trying to install or boot (typically the CD image or Netinstall mode) on a physical server or PC, and the installer cannot detect any optical drive. However, because MikroTik is usually installed on flash drives, hard disks, or virtual machines , this error often indicates a deeper boot or storage controller issue.

If none of the above works, consider running on a hypervisor – it eliminates all hardware compatibility issues. fatal error no cd rom found mikrotik

legacy_ide=1 all_generic_ide=1 Or to skip CD detection entirely (not always possible): This error occurs when trying to install or

| Setting | Recommended value | |---------|------------------| | | IDE or Compatible (not AHCI, not RAID) | | Boot Mode | Legacy or Legacy+UEFI (avoid pure UEFI) | | CSM | Enabled | | Secure Boot | Disabled | | Fast Boot | Disabled | | USB Legacy Support | Enabled | or virtual machines

RouterOS’s kernel (especially versions <7.x) expects legacy IDE CD-ROMs. Switching SATA to IDE mode often resolves the error. 3.3. Try Netinstall (Most Reliable Method) Netinstall bypasses the CD-ROM check entirely by booting a small kernel over the network.