Solution Manual Steel Structures Design And Behavior 【2025-2027】

Given edge distance = assume 1.5 in (standard), spacing = 3 in, hole diameter = 1 in, thickness = 0.5 in.

Thickness ( t = 0.5 \text{ in} ). Two hole diameters in the failure path (assuming worst path goes through both holes in the same leg – check path 1-2-3). solution manual steel structures design and behavior

Better to follow AISC manual example: For L4×4×½ connected with 3 bolts, block shear strength: Given edge distance = assume 1

[ A_{gv} = 2 \times ( \text{shear length along bolt line}) \times t = 2 \times 7.5 \times 0.5 = 7.5 \text{ in}^2 ] [ A_{nv} = A_{gv} - 2 \times (2.5 \times d_h \times t) \quad \text{(2.5 holes per shear plane)} = 7.5 - 2 \times (2.5 \times 1.0 \times 0.5) = 7.5 - 2.5 = 5.0 \text{ in}^2 ] [ A_{nt} = ( \text{gage} - d_h) \times t = (2.0 - 1.0) \times 0.5 = 0.5 \text{ in}^2 ] Better to follow AISC manual example: For L4×4×½

Gross shear length = ( 1.5 + 3 + 3 = 7.5 \text{ in} ) (from edge to last bolt). Net shear length = ( 7.5 - 2.5 \times d_h = 7.5 - 2.5 = 5.0 \text{ in} ) (since 2.5 holes along shear path? Actually 2.5 holes for two lines? Need precise – typical simplified: net shear area = ( (7.5 - 2.5*(1.0))*0.5 = 2.5 \text{ in}^2 ) per plane, two planes = 5.0 in²).

LRFD: ( \phi_t = 0.75 ) → ( P_d = 0.75 \times 129.5 = 97.1 \text{ kips} ) ASD: ( \Omega_t = 2.00 ) → ( P_a = 129.5 / 2.00 = 64.8 \text{ kips} )

[ U = 1 - \frac{1.13}{6} = 0.812 ]