# 1. Connect module USB -> PC # 2. Identify I2C bus (usually 1 or 2) i2cdetect -y 1 # Should show device at 0x42 (UIS8141E I2C address) python flash_uis8141e.py --bus 1 --addr 0x42 --fw uis8141e_fw_v3.02.bin
# Dump SPI flash via I2C (if supported) python uis_dump.py --bus 1 --addr 0x42 --output backup_fw.bin Or using SPI programmer: uis8141e firmware
// Example I2C sequence (C pseudo-code) uint8_t fw_buf[128*1024]; FILE *fp = fopen("uis8141e_fw.bin", "rb"); fread(fw_buf, 1, sizeof(fw_buf), fp); // Enter firmware update mode i2c_write(0x42, 0x00, 0xA5); // unlock i2c_write(0x42, 0x01, 0x5A); // enter bootloader # 1. Connect module USB ->